SW30-2521 Filmtec Seawater Membrane 2.5"x21" 300 GPD,

Dow® Filmtec™ Filmtec SW30-2521 membrane elements have the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. Filmtec SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses. Improved Filmtec seawater membranes, combined with automated, precision element fabrication, result in the most consistent product performance available while maintaining excellent salt rejection. Filmtec's superior automated manufacturing technology results in the most consistent performance element-to-element and year-after-year.

Specifications for SW30-2521

FilmTec Product:	SW30-2521
FilmTec Part Number:	80734
Size (Approximate):	2.5" Dia. x 21"L
Flow Rate:	300 gpd (1.1 m³/d)
Applied Pressure:	800 psig (55 bar)
Stabilized Salt Rejection:	99.4%
Exterior:	Hard Shell Fiberglass
Active Membrane Surface Area:	13 sq. ft.
Membrane Type:	Polyamide Thin-Film Composite

Permeate flow and salt rejection based:  32,000 ppm NaCl feed stream, 77°F, 5% recovery, 800 psig.

Operating Limits for SW30-2521

Maximum Operating Temperature:	113°F (45°C)
Maximum Operating Pressure:	1,000 psig (69 bar)
Maximum Pressure Drop:	15 psig (1 bar)
Maximum Feed Flow Rate:	6 gpm (1.4m³/h)
pH Range, Continuous Operation*:	2-11
pH Range, Short-Term Cleaning**:	1-13
Maximum Feed Silt Density Index:	SDI 5
Fere Clorine Tolerance***:	<0.1ppm

Features:

• For use in seawater desalination and marine (yacht) applications
• High flux reduces energy use or pressure require
• Good rejection results in good quality water
• Filmtec performance and quality

*Maximum temperature for continuous operation above pH 10 is 95°F **Refer to cleaning guidelines. ***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.